How to Save on Your Heating Bills This Winter

If you have noticed your energy bills rising or you look at your budget only to realize it is time to cut back on some areas, your heating bills may be one of your main focus. There are ways that you can save money on your heating bills this winter and still stay comfortable in your home.

How to Reduce the Cost of Your Heating Bills

These tips can help you keep your home comfortable while giving your furnace and your bank account a break.

  • Switch Out Your Filters – While it may seem like a simple solution, if you have dirty furnace filters these can cause your system to have to work a whole lot harder—which costs you more.
  • Turn Down the Thermostat – Turning down your thermostat can save you up to 5 percent on your heating costs, this is especially true if you keep your home between 68 to 70 degrees.
  • Use a Programmable Thermostat A programmable thermostat can allow you to keep your home comfortable when you need it the most. You can put a program in that allows your house to get a little cooler while you are out of the house, then have it warm up right before you get home. You can also set a day time and night time schedule allowing you to cool off a little at night when you are nestled in bed.
  • Hang Heavy Curtains Hanging heavy curtains can help reduce cold air leaking in through drafty windows. Open them during the day to bring in the sunshine, then close them before the sun sets.
  • Seal Windows and Doors If you have windows and doors that tend to let the cold air seep in, invest in some weather stripping caulk or special sealing tape.
  • Switch Your Ceiling Fan If you have a ceiling fan, switch it back on for the winter and change the direction the blades are turning. This can help push the warm air that rises back into your room, leaving your home feeling more comfortable.
  • Replace Old Systems If you have an old heating system, hot water system or even an old dishwasher, you can save money by replacing these older systems out with new energy efficient systems.
  • Schedule Annual Maintenance – Getting your heating unit inspected once per year can not only ensure your unit is safe to use but it can also increase efficiency—which could save you money on your bill!

Just making a few of these changes can make a big difference when it comes to saving on your heating costs.

Call Hill & Company for Furnace Replacement in OKC & Tulsa

If you would like to know more about replacing your current system with an energy efficient model, contact the team at Hill & Company. Since 1967, we have been providing top customer service to homeowners in the Tulsa and Oklahoma City area. Contact us today to learn more!

Why Is My Furnace So Loud?

A loud furnace can be annoying to anyone living in or visiting your home. There are many different types of noises your furnace might be making and this could be due to a range of issues. One thing to note is that if your furnace is making loud or unusual noises that it is important to have your furnace fixed by an expert. Leaving your heating unit could result in damage or could leave you with no heat.

Why Your Furnace Might be Making Noises

A furnace that is making loud banging, whistling, rattling or screeching sounds likely has something going on inside it. Below are some of the more common noises and reasons your furnace may be keeping you awake at night.

  • Banging – If you hear a loud bang when the furnace first starts up your system may have an ignition problem. Watch your furnace when it starts up, if you see a large flame or there is excessive rattling you will need to call an HVAC professional straight away. If the banging is not due to an ignition problem you may notice the banging sound when you walk near the furnace. This could be due to a duct that is screwed in too tight or the metal panning around the duck may not be secured correctly.
  • Rattling – If there are loud rattling sounds or unusual vibrations coming from your furnace ducts it may be that your ducts are not placed correctly. This could be due to loose or missing screws in the ductwork.
  • Whistling – Whistling sounds can come from many sources, one source that can be easily recognized and fixed is a clogged filter. A bigger issue that may be causing whistling is your ductwork.  If your ductwork is too small for your home or there are gaps in the ducts whistling may occur. If your filter is clean and you can still hear whistling it is a good idea to contact an HVAC expert.
  • Screeching – Screeching or squealing often signals that there is a problem with your blower wheel or the motor. No matter what is going on if you hear screeching or squealing call an expert.

Contact Hill & Company to Schedule a Repair

No matter what type of sound your furnace is making, if something sounds out of the ordinary it is a good idea to contact an HVAC professional to schedule a repair. The team at Hill & Company can help diagnose what is going on in your furnace and help make the relevant repairs. Give us a call or contact us online to get your furnace working quietly again!

Changing Your Furnace Air Filter

Your furnace filter is very important when it comes to your furnace’s efficiency and keeping your home comfortable through the winter months. Many times homeowners forget to change out their filters. This is due to the fact that we don’t see the filter so it is not at the front of our minds; however regularly switching out your furnace air filter is important.

 

How Often Should You Change Your Furnace Air Filter

How often you change your filter will depend on what happens on a daily basis in your home. It is important to change the filter in the fall, this will make sure your furnace is ready to go when the cold winter hits. Ideally you should change your filter every two months. If you have pets, you may want to switch out the filter every month, this is due to the buildup of pet hair and dander. If you have people in your home that suffer from allergies or have respiratory illnesses it is also a good idea to change out your filter more often.

How to Change Your Furnace Air Filter

Changing your filter is not a difficult process and the benefits are well worth the trouble, however inserting your filter the right way can make all the difference. To change your furnace filter, take the following steps:

  1. Remove your furnace front panel or air return, this is where most filters are placed.
  2. Look at your new furnace filter and find the little arrow, this is usually found on the surrounding cardboard area.
  3. It is important that you insert your air furnace with the arrow facing towards your furnace. Facing the arrow the wrong way can hinder your furnaces air flow.
  4. Once you have the arrow facing towards your furnace, slide the filter in place.

Now you can slide your panel back in and you have finished replacing your furnace air filter.

How to Clean a Reusable Filter

Some homeowners choose to use a reusable filter, it is just as important if not more so that these filters are regularly cleaned.

  • If you have a reusable filter it will have a plastic casing surrounding it, take the filter out of your furnace.
  • Use a vacuum to remove dust and debris from the filter. You will also want to vacuum out the area where the filter regularly sits.
  • Wash the filter outside using a hose to remove all dirt, dust and debris build up on your filter.

Once your filter is clean be sure to leave it to dry before placing it back inside your furnace.

Contact Hill & Company for Furnace Troubles in OK

Changing your filter out or cleaning your reusable filter is an important step in keeping your home’s air clean and keeping your furnace running efficiently. If you would like help with your furnace filter or you are looking for repairs or installation service, contact the team at Hill & Company. We offer a full range of HVAC services within the Tulsa and Oklahoma City areas.

Heating Tips for Holiday Parties

If you are hosting guests this holiday, you may wonder how to keep everyone comfortable in your Oklahoma home. Weather on this side of the country can be a bit unpredictable—temperatures can drop as low as in the 20’s or be as high as 50 degrees in December! With extra guests, in addition to having the oven on, it may be challenging to choose a perfect temperature on your thermostat. Luckily, the heating and cooling experts at Hill & Company have outlined a few tips to follow this holiday season that will keep your heating bills low and your guests comfortable.

Energy Saving Tips for the Holiday

If you are looking to keep your heating bills low this holiday, keep these simple tips in mind:

  • If no one is home during the day, turn down the thermostat. Many homes have programmable thermostats that will automatically adjust based on what time of day it is. If you do not have a programmable thermostat, be sure to turn down the heat before you leave your home.
  • After cooking, leave the oven slightly open to exhaust the heat. Letting the heat out from the oven will help warm areas of your home without turning up the temperature. While doing this, use extreme caution—especially if you have pets or small children.
  • If it is too warm in your home, crack open windows before you turn on the AC. Chances are with the number of guests and extra cooking your home may get toasty on a warm day. To save energy, open windows and turn on fans to keep it cool.
  • If you have elder parents or small children visiting, buy a portable heater for their room. Sometimes, babies and the elderly get cold easier. Instead of turning up the furnace, purchase a portable heater specifically for their room.
  • Use the sun to your advantage by opening curtains and blinds. Oklahoma winters can be sunny—let the sun shine through your windows. It will not only brighten up your home but will also bring in free heat.
  • Schedule furnace maintenance before your guests arrive. Scheduling maintenance will help your furnace run more efficiently—using less energy and could potentially lower your heating bills. Before your guests arrive, make sure your local HVAC contractor inspects your heating unit to ensure it is running efficiently.

By following these simple steps above, you can ensure you are taking proper precautions to keep your energy bill low during the holiday.

Contact Hill & Company for Furnace Maintenance

Before your guests arrive this holiday, be sure to schedule furnace maintenance. If you are located in the Tulsa or Oklahoma City area, call Hill & Company. We are an expert HVAC company that can help fix any furnace need. Contact us online or give us a call to schedule an appointment!

Finding the Best HVAC Contractor in Edmond, OK

If you are looking for a heating and cooling expert, chances are you may struggle to find the best in your area. There are many different routes you can take when finding a heating and cooling contractor, but what is the best way to find a reliable contractor? Read our blog below for tips on how to find the best contractor in your area!

Tips to Research Top Heating and Cooling Contractors

Researching a heating and cooling contractor may be overwhelming. Especially in the Oklahoma City area, there are many contractors to choose from. Next time you are doing your research, keep these simple tips in mind to find the best contractor in your area.

  1. Read testimonials – Learning about a company through their current or previous customers can be one of the best ways to assure you are receiving top service in your area. Check on their website for testimonials, as well as outside sources to see what homeowners around the area think of their service.
  2. Ask family, friends, co-workers, and neighbors – Many of the people you speak with every day have had an HVAC contractor enter their home at some point. Whether it was to install a new furnace or to repair an AC unit, the people you know and trust have probably had HVAC services. Ask around your neighborhood to learn about their previous experiences. Were they comfortable with having the technicians in the home? Did they provide reliable and high quality service? Asking questions such as these can help you have a better understanding of the contractors that are in your neighborhood.
  3. Are there promotions? – Promotions are a great way for homeowners in Edmond and the surrounding areas to compare and contrast costs between different companies in the area.
  4. Check Google Plus page – If a company keeps up with its business, information will be up to date on their Google profile and the business will be verified.
  5. Research the service you need – Doing a little pre-research before you contact a contractor will help you and the contractor have a better understanding of the task at hand. For example, if you are looking to install a heat pump, make sure you contact a company that is certified to install heat pumps in your area.
  6. Research the brands – Sometimes, an HVAC contractor will only service certain brands of air conditioners and furnaces. Some companies, such as Hill & Company, can service and repair any brand of heating and cooling unit; however, we specialize in installing Trane® furnaces, heat pumps, and air conditioners.

Grab the Phone and Call!

After you make a list of two or three potential contractors in your area, give them a call! Always ask for a quote to help avoid unexpected fees and expenses so you can plan accordingly regarding your financial commitment.

Leading HVAC Contractor in Edmond, OK

If you live in Edmond, Oklahoma or the surrounding areas and are looking for an HVAC contractor you can trust, contact Hill & Company. Since 1982, we have been a leading heating and cooling contractor in Tulsa and Oklahoma City. Contact us today for top HVAC services in your home!